Static Analysis of Collision Strength of Offshore Platform     

Li Runpei Chen Weigang Gu Yongning Professor  Shanghai Jiao Tong University  Shanghai Assistant  Shanghai Jiao Tong University  Shanghai 《中国海洋工程》1996,(1)

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.  相似文献   

基于突变理论深埋硬岩隧道的失稳分析   总被引：3，自引：0，他引：3  

闫长斌  徐国元 《工程地质学报》2006,14(4):508-512

在分析隧道开挖引起围岩扰动和损伤的基础上,运用突变理论探讨了深埋硬岩隧道失稳的机理;基于势能原理,建立了深埋硬岩隧道失稳的尖点突变模型,导出了失稳的力学判据条件。结果表明:深埋硬岩隧道的失稳不仅受岩体特性及所受载荷的影响,而且与围岩中弹性区刚度和塑性区刚度的比值有关;开挖过程中,围岩受扰动和损伤程度越大,岩体完整性系数越小,力学参数指标弱化程度越高,塑性区范围越大,刚度比越小,围岩系统发生失稳的可能性就越大。工程实例分析表明,分析结果与实际经验基本一致;研究成果可为预防隧道失稳、采取合理的施工工艺和支护措施提供参考依据。  相似文献   

上覆岩层组合运动的力学解析特征研究   总被引：2，自引：0，他引：2  

刘开云  乔春生  滕文彦 《工程地质学报》2003,11(4):372-377

运用弹性薄板理论和复合材料力学的层合板理论,讨论了在覆岩运动中起决定作用的组合关键层的应力,为计算组合关键层的整体强度提供了途径;并且从控制开采沉陷工程实际入手,将结构塑性极限分析理论运用于组合关键层的失稳最大荷载计算,解析得出了充分采动情况下关键层塑性极限荷载的表达式,从另一个角度得到了一种判别关键层位置的新方法,为实施离层带注浆减沉提供参考。  相似文献   

慢地震慢前兆的机制研究   总被引：12，自引：1，他引：12  

许昭永  杨润海  胡毅力  许峻  王赟赟 《地震》2003,23(2):12-20

通过岩石高温高压破裂实验与有机玻璃破裂试验的应力—应变曲线对比、地震波形记录(观测资料)与试样破裂波形(实验资料)对比、地震前后定点应变与主破裂前后应变形态变化的对比，认为慢地震是临界或亚临界破裂或预先滑动所致，是低频应变波动。它是材料屈服、弱化或塑性变化的必然结果。而慢前兆则是临近大地震(大破裂)前出现的诸如形变、低频地震波(破裂弹性波)等的短期及临震前兆现象，它比较可靠。但由于许多岩石主破裂前并无明显的临界破裂或预滑动现象，也并非所有岩石都一定出现明显屈服，所以也并非每个地震前都有慢地震，因此，也就不一定都出现低频波动。从而，也并不一定都出现相同的短期、临震前兆现象。  相似文献   

红透山矿床变质岩系褶皱构造特征浅析   总被引：1，自引：0，他引：1  

王锡华  李伟 《矿产与地质》2004,18(3):245-248

红透山式铜-锌矿床形成于太古代克拉通裂谷槽盆中海底火山喷发-沉积环境。因此，矿床的空间展布严格受特定的含矿岩系所控制。槽盆构造中的岩层褶皱构造最发育，矿床赋存在具多期褶皱构造叠加的大型同倾向形褶皱内，褶皱的层间虚脱是控矿有利构造空间，可以借此预测矿体侧伏方向及赋存部位。  相似文献   

A comparative study of concentrated plasticity models in dynamic analysis of building structures     

Maurice A. Dides  Juan C. de la Llera 《地震工程与结构动力学》2005,34(8):1005-1026

Concentrated plasticity (CP) models are frequently used in static and dynamic building analysis and have been implemented in available commercial software. This investigation deals with three different CP‐models, a simplified macroelement model (SEM) for a complete building story, a frame element with elasto‐plastic interaction hinges (PH), and a frame element with fiber hinges (FB). The objectives of this work are to evaluate the quality of the earthquake responses predicted by these models and to identify important aspects of their implementation and limitations for their use in dynamic analysis. The three elements are tested in a single‐story asymmetric plan building and in a three‐story steel building. Results show that base shear and global response values are usually computed with better accuracy than interstory deformations and local responses. Besides, the main limitation of elasto‐plastic CP models is to control the displacement offsets that result from perfect elasto‐plastic behavior. On the other hand, calibration of the SEM‐model shows that global responses in steel structures may be computed within 20% error in the mean at a computational cost two orders of magnitude smaller than that of the other CP elements considered. However, the three element models considered lead to increasing levels of accuracy in the dynamic response and their use depends on the refinement of the analysis performed. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Pressure sensitivity of olivine slip systems: first-principle calculations of generalised stacking faults     

J. Durinck  A. Legris  P. Cordier 《Physics and Chemistry of Minerals》2005,32(8-9):646-654

We have used a first-principle approach based on the calculation of generalised stacking faults (GSF) to study the influence of pressure on the mechanical properties of forsterite. Six cases corresponding to [100] glide over (010), (021) and (001), and [001] glide over (100), (010) and (110) have been considered. The relaxed energy barriers associated with plastic shear have been calculated by constraining the Si atoms to move perpendicular to the fault plane and allowing Mg and O atoms to move in every direction. These conditions, which preserve dilations as a relaxation process, introduce Si–O tetrahedral tilting as an additional relaxation mechanism. Relaxed GSF show little plastic anisotropy of [100] glide over different planes and confirms that [001] glide is intrinsically easier than [100] glide. The GSF are affected by the application of a 10 GPa confining pressure with a different response for each slip system that cannot be explained by sole elastic effect. In particular, [100](010) is found to harden significantly under pressure compared to [001](010). Our results give the first theoretical framework to understand the pressure-induced change of dominant slip systems observed by Couvy et al. (in Eur J Mineral 16(6):877–889, 2004) and P. Raterron et al. (in GRL, submitted). It appears necessary to account for the influence of pressure on the mechanical properties of silicates in the context of the deep Earth.  相似文献   

改进霍夫变换的枢纽立交桥检测方法     

刘菁欣  白云  王俊 《测绘科学》2016,41(10):136-141

针对传统遥感系统对特定建筑物提取难的问题,该文提出了一种高空摄影系统下基于改进霍夫变换的城市枢纽立交桥检测方法。该方法首先对图像进行预处理和分割,对分割后图像进行形态学处理提取直线和曲线道路,弥补了单一提取直线道路的不足;然后对提取后的道路进行基于改进霍夫变换的近似圆形立交桥匝道的识别;最后依据圆形完整度门限判断可识别的圆形匝道个数,并根据识别数目来判定是否存在立交桥。经过实验比较分析,该方法对于国内外常规的立交桥系统识别效果都较好。  相似文献   

泡沫塑料吸附测金中无臭灰化技术的改进     

郭玉生 《铀矿地质》1989,5(1):51-52

根据泡沫塑料(简称泡塑)吸附测金的无臭灰化技术的机理,作者采用了3ml圆底瓷坩埚灰化,解决了大批量佯品的灰化问题和电极装样困难的问题,并节省了灰化用的滤纸。  相似文献   

三山岛金矿控矿断层F1的力学性质及补强措施   总被引：1，自引：0，他引：1  

郭志 《工程地质学报》1994,2(4):23-30

作者以正在开采中的三山岛金矿采场为研究对象，分析矿区开采过程中的岩体结构特征及重力方向矿柱、护顶矿柱与控矿断层F1断层泥及其上覆岩体之间的关系和力学机制。通过试验研究了断层泥的物质成分和力学性质，总结了力学特性与断层泥厚度及含水量之间的关系。在此基础上提出锚固大于中倾角的结构面，提高结构面的抗滑阻力；增加含有高、陡倾角结构面矿柱的刚度等对矿柱的补强措施。对护顶矿柱提出预先锚固；分阶段开采的补强方法。在裂隙密集带设置排水设施，改善断层泥的赋存条件，提高它的力学性能。  相似文献